软管泵腐蚀性大泵送设备

软管泵的典型用途：
化工行业，各种防腐蚀浆料和无机盐物料；石油、钻井、水处理、泥浆、石灰浆；采矿冶金的充填物料，矿浆输送；食品行业，油类物料及饮料，糊状料输送；造纸行业，纸浆、硫磺输送；建筑业，水泥沙浆、泡沫混凝土生产线，楼顶屋泡沫轻质流体物料；油漆、涂料、钛 、二氧化碳等物料输送。

Typical use of hose pump:
Chemical industry, various anti-corrosion slurry and inorganic salt materials; petroleum, drilling, water treatment, mud, lime slurry; filling materials for mining and metallurgy, slurry transportation; food industry, transportation of oil materials and beverages, paste; papermaking Industry, pulp and sulfur transportation; construction industry, cement mortar, foam concrete production line, rooftop foam light fluid materials; paint, coating, titanium dioxide, carbon dioxide and other materials transportation.

电机+定整比减速器 <br />
  主要特点：承载能力强，效率高，振动小，噪音低，能耗低，传动方式简单，但由于其速比恒定，所以决定了流量不可调。<br />
   变频电机+变频器
  主要特点：扭矩大，调速精度高，运转平稳，性能稳定，可实现转速的自动调节，确保了流量的任意控制，弥补了无级变速器自动化程度不高的缺陷。缺点是变频器的价格较高。<br />
    液压马达式。                 

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.