工业软管泵2立方玉门地下通道排水

软管泵压辊的调整
泵出厂时，压辊已按正常情况调整到位，如遇物料吸不上，或在泵的额定压力下，口量达不到要求，请调整压辊的偏心距，其步骤如下：
（1）先将泵壳两侧相应的圆孔有机玻璃盖板与泵出口端的长方形有机玻璃盖板打开，将转子压辊旋转至两圆孔之间，其螺栓正对圆孔，然后用套筒扳手将两端螺栓拧松，再用小圆棒或十字螺丝刀，对准标有0，1，2，3的圆孔，拨动压辊一侧内的偏心套转动，偏心套的数字越大，其压辊与泵壳间的距离越小，软管压的越紧，其调整是以转子的顶端的刻线为基准，数字越大，压的越紧，反之亦然。
（2）调整间隙时一定要注意不要压的过紧，以达到流量为准，压的越紧，对胶管的寿命影响越大。

软管泵的工作原理及应用：软管在泵体内呈U形布置。当旋转体带动挤压轮旋转时，挤压软管受到挤压轮的挤压而发生弹性变形，然后吸入口形成负压吸浆。通过挤压轮的推动，浆液从出料口排出，形成浆液的压力输送。工业软管泵主要应用于建筑、地下工程、矿山、食品、造纸、陶瓷等领域的粘性浆液远距离输送、计量泵送、压力灌浆、喷射等。  

Working principle and application of hose pump: The hose is arranged in a U-shape in the pump body. When the rotating body drives the extrusion wheel to rotate, the extrusion hose is elastically deformed by the extrusion wheel, and then the suction port forms a negative pressure suction slurry. By the push of the squeeze wheel, the slurry is discharged from the discharge port, forming a pressure transfer of the slurry. Industrial hose pumps are mainly used for the long-distance transportation of viscous slurry in the fields of construction, underground engineering, mining, food, papermaking, ceramics, metering pumping, pressure grouting, spraying, etc.